| Chemical Products |
 ET-01(SPONGE REINFORCING AGENT)
ET-01 is remarkale peptizing agent which is particularly suitable for mastication of EVA and it is helpful for mastication of EVA or EVA scrap. It saves time nad evergy because it is so effective even with small quantity. This product makes the flow ... |  |
 ARA-150(ANTIADHESIVES FOR RUBBER SLAB)
ARA-150 is a white water-disperside powder, which is used in the rubber industry to avoid surface sticking of unvulcanized rubber compounds. Because of the reliable separating effect with most types of compound and the stablity of the ready-to-use ... | |
 JS-90 M/B(INSOLUBLE SULFUR)
JS-90 does not cause blooming of uncured rubber compound. Accelerator, sulfur and filler composed with JS-90 scarecely raises migration, discoloration and contamination. Even if the temperature of workshop is over 40~50C, by using of JS-90 scorch of ... | |
 JS-723(RUBBER COMBINATION MEDICINES)
JS-723 is the most effective fading-registance agent, it is developed to prevent fading, change of color and producing offensive odour, etc..., of synthetic plastic, rubber or textile products. | |
 ABA-150(REINFORCING AGENT FOR ANTI BLOOMING)
When you produce outsole for shoe, blooming can be caused. To make up for the weak point, we make this ABA-150. It improves flow and adhesive effect on physical anti blooming for powdered materials loaded approx 3 to 5 phr. | |
 EMB-1000(EVA CARBON MASTER BATCH)
EMB-1000 ,EVA carbon black master batch, has been developed for coloring of sponge. It is processed with EVA(18%), black carbon and special dispersion. This is used for black sponge and all black gooks which make use of EVA. | |
 PHYLON-L(MOLDING AGENT FOR EVA, PE, PP FILLER)
PHYLON-L filler does be possible to large economical efficiency and a product because it reduced etween the ploymer of rubbing. PHYLON-L gives permanency of a slip quality and chatacter of a anti-block quality to a finished product. | |
 JS-13B(CELL STABILIZER FOR EVA)
JS-13B contents from blend of high molecalar aliphatic, hydrophilic fatty acid esters and ploy ethylene glycol condensation material, bound to fillers. And JS-13B improves flow and release with no adverse effect on physical dispersing agent loading ... | |
 JS-570(ADHESION REINFORCE)
It is easy to mix liquid elastomer and peculiar white carbon. This improves flow and adhesive effect on physical dispersing agent for powdered materials loaded approx 2 to 3 phr. | |
 JCP-750(SUPER REINFORCING AGENT)
JCP-750 is a reinforcing agent for physical prorerties. It makes the time of vulcanization shorten and improve an abrasion resistance. | |
 ZW-PIGMENT M/B(FLUORESCENCE PIGMENT M/B)
When you apply them to rubber in general, blooming will be caused by a dispersion, a migration and a delay of vulcanization. Our company makes a product to complement these faults. Eventhough you leave our product for a long time under the M/B, it is ... | |
 HM-100(FLUORESCENCE BRIGHTENER)
HM-100 can help to improve white coloring of EVA sponge. This is a form of master batch which is made of an organic compound and EVA. HM-100 can make white coloring which you can't make with Tio2. Also, if increases the effect of whiteness. | |
 KRF-200(CEMENT HARDENER)
KRF-200 is ploymerized with isocyanat ethyl acetate. If you add this one to CR-bonding agent and PU-adhesive, you will find out the imporvement of the adhesive strength and it is good for ot only intial fixatio but also discoloration. | |
Contact Information